Olympia Chimney Chimney Cleaning & Sweep Nationwide

Olympia Chimney Chimney Cleaning & Sweep in New York: What to Know First

We provide independent Olympia Chimney chimney cleaning and sweep service across New York’s five boroughs, with most jobs completed in a single visit lasting 90 minutes to two hours. A standard Olympia Chimney sweep with a Level 2 camera inspection runs $289 to $389 in New York, depending on flue height, creosote class, and roof access. We give you that price in writing before anyone touches your chimney, and you’ll walk away with a photo record of what we found. This page is for New York homeowners who own an Olympia Chimney product and want the straight answer on cleaning, inspection, and what actually needs fixing. Call (551) 213-5548 and you’ll get a live person, not a voicemail tree.

Call (551) 213-5548

How Olympia Chimney Products Fail - and How We Find It

Olympia Chimney builds solid stainless steel liners and caps, but we’ve swept enough of them across New York to know exactly where they wear and what looks like a problem but isn’t. Here’s what we actually run into:

• Olympia Chimney rigid stainless liners (usually 316L or 316Ti alloy): these hold up well to New York’s freeze-thaw cycles, but the seam joints where liner sections connect can open slightly after years of thermal expansion. You won’t see it from the firebox. Our camera finds it. The fix is often a re-band at the joint, not a full liner replacement.
• Olympia Chimney flexible liner kits with uninsulated sections: in New York brownstones and prewar buildings, uninsulated flex liners run through exterior chimneys that get cold in January. Cold liner walls mean flue gases condense, creosote builds faster, and you get the tar-like Class III deposits that smell and burn. We see this in Prospect Park and Park Slope brownstones regularly. Insulation wrap solves the condensation cycle, and we quote it only when the photos prove it’s needed.
• Olympia Chimney rain caps and spark arrestors: the mesh screen on top is the first thing to go. In New York, pigeon droppings, nesting material, and wet leaves pack into the mesh, cutting draft by half or more. A cap screen that’s 60% blocked makes your fireplace smoke back into the room. We clean the cap on every visit and replace screens when the mesh has rusted through.
• Olympia Chimney flashing and storm collars at the roofline: on flat-roofed New York row houses, water pools around the chimney base longer than on pitched roofs. The storm collar loosens, water seeps down the liner exterior, and you get rust staining on the firebox wall. We check the collar on every roof-access sweep and re-seal it with high-temp silicone when the old bead has cracked.
• Creosote loading, not product failure: most Olympia Chimney owners call us for smoke, smell, or slow draft, and the culprit is ordinary creosote buildup. What’s different with Olympia liners is their corrugated interior. Creosote hides in the corrugation valleys and a brush pass won’t always get it. Our rotary whip attachment with nylon strands reaches into those valleys without scoring the stainless. That’s the difference between a clean-looking sweep and an actually clean flue.

Our Olympia Chimney Chimney Cleaning & Sweep Process

Every Olympia Chimney job in New York follows the same documented sequence. No shortcuts, no “we’ll eyeball it.” Clause 4 of the Haven Standard requires a photo record on every job, and we’ve done that on every visit since 2009.

1. 1
   You call (551) 213-5548. A live person answers, we ask about your Olympia Chimney setup, the age of the liner, and the last sweep. We book a window, not a vague “sometime Tuesday.” You get a text when the tech is on the way.
2. 2
   On arrival, the tech walks the flue from the firebox up. We photograph the cap, crown, flashing, smoke chamber, and liner before any brushing starts. If you have an Olympia Chimney cap or liner, we document its condition first so we both know the starting point.
3. 3
   Camera down the flue. This is the NFPA 211 Level 2 inspection we do on every single visit. The camera shows us creosote class, joint condition, liner integrity, and any obstruction. You see the footage with us, not a shrug and a scribbled note.
4. 4
   Mechanical sweep with the right tool for the liner. For rigid Olympia Chimney stainless, we use a poly brush sized to the inner diameter so it cleans without scratching. For flex liners with heavy build-up, we use a rotary whip with nylon strands to get the corrugation valleys. We never use steel cable brushes on stainless. That scratches the liner and gives creosote a rough surface to grab onto next winter.
5. 5
   Post-sweep camera pass and written report. You get photos of the before and after, a written scope of what was done, any readings, and a written price if we recommend further work. Nothing is recommended that you can’t see with your own eyes in the photos.
6. 6
   Cleanup and your record. We leave the hearth cleaner than we found it, and you get a documented job record. The 365-Day Done Right Promise is stamped on it: if it’s not done right, we make it right.

Before

After

What Olympia Chimney Chimney Cleaning & Sweep Costs in New York

We name the price before work starts, in writing, every time. Here’s the range for common Olympia Chimney jobs in New York:

• Standard chimney sweep with Level 2 camera inspection: $289 to $389. This includes the full camera pass, mechanical sweep, cap cleaning, and photo report. One fireplace, standard roof access.
• Heavy creosote removal (Class III or glazed tar deposits): $425 to $650. This takes longer, needs the rotary whip, and often a second pass. Common in New York homes that burn unseasoned wood or skip annual sweeps.
• Cap and screen replacement on an Olympia Chimney cap: $180 to $350 installed, depending on cap size and roof access. The screen is the part that fails first, and replacing the screen only is usually $85 to $140.
• Joint re-band or minor liner repair found during the sweep: $200 to $450. We quote this after the camera shows the separation, and you approve before we touch it.

What moves the price: roof type (New York flat roofs and high-pitch brownstone roofs take longer to access safely), liner height, creosote class, and whether you want the cap screen replaced the same day. We give you the exact number before work starts. No surprises, no “while we’re in there” additions. Call (551) 213-5548 for a free estimate on your Olympia Chimney sweep.

Why New York Homeowners Call Level Two Chimney New York for Olympia Chimney Work

We’re not the cheapest sweep in New York, and we don’t try to be. We’re the company that hands you a written price, a written scope, and photos of the actual problem before you spend a dollar on repairs. The camera doesn’t argue with you, and neither does the price sheet.

That’s how Corrine Halstead, our owner, has run Level Two since day one. She grew up in the Bronx, spent years cleaning and inspecting chimneys across New York City, and learned the technical side through the building trades program at Bronx Community College. She reads a flue liner the way a mechanic reads an engine, and she writes repair estimates the same way: name the part, state the condition, give the number.

We’ve completed more than 38,000 chimney inspections and cleanings since 2009, every one documented with a photo record. We work on Olympia Chimney products daily, and we also stock and install DuraFlex, HeatShield, and Gelco components when a repair calls for a different material. Being independent and multi-brand means we recommend the right fix, not the one we happen to sell. Our techs are background-checked and uniformed. Our phones are answered by a person at 3 a.m. And every job carries the 365-Day Done Right Promise. If it’s not done right, we make it right.

FAQs