Olympia Chimney Chimney Liner & Rebuild Nationwide

Olympia Chimney Chimney Liner & Rebuild in New York: What to Know First

We provide independent Olympia Chimney chimney liner and rebuild work across New York’s five boroughs, typically completing a full liner replacement in one to two days once we’ve scoped the job. A stainless steel liner replacement in New York usually lands between $2,400 and $5,800 here, depending on flue height and access; a partial rebuild above the roofline runs $3,000 to $9,000. We’re not affiliated with Olympia Chimney, but we’ve pulled enough of their liners out of New York flues to tell you exactly where they fail and what’s worth fixing. If you own a home with an Olympia Chimney liner and the camera shows trouble, call (551) 213-5548. We’ll give you a written price before anyone picks up a tool.

Call (551) 213-5548

How Olympia Chimney Products Fail - and How We Fix Them

• Olympia stainless steel rigid liners: seam separation at the joints. In New York homes with tall flues and frequent thermal cycling, the snap-lock or riveted seams on Olympia’s rigid liner sections can begin to separate after ten to fifteen years. We see it most in pre-2010 installations where the liner was sized tight against the original clay tile. The fix is a full liner replacement, and we quote the job with either a new rigid Olympia liner or a DuraFlex equivalent, depending on what the flue diameter and cap assembly call for.
• Flexible Olympia liners: kinking in offset flues. Flexible liners are meant to bend, but New York chimneys with aggressive offsets (the kind you get in older brownstones and townhouses) can pinch a liner enough to restrict draft. The symptom is a fireplace that smokes back into the room only when the wind comes from a certain direction, or a gas water heater that trips its rollout switch. We diagnose it with a camera, not a guess, and if the liner’s collapsed, we replace it with a properly sized flex liner sized for the actual offset, not the nominal flue diameter.
• Olympia chimney caps and crowns: rust-through at the mounting flange. Olympia’s standard stainless caps have held up well on most New York rooftops, but the mounting hardware and the flange where the cap meets the flue tile is where we see rust and separation. Once the cap fails, rain gets directly onto the liner and into the smoke chamber. We’ll replace the cap when we rebuild the top of the chimney, and we’ll show you a photo of the old one on the way out.
• Olympia chimney chase covers: galvanic corrosion at the liner collar. On homes with wood-framed chimney chases (common in Staten Island and Queens), the steel chase cover and the stainless liner meet at the top. When the two metals are in contact without isolation, the steel corrodes around the collar. We see this on Olympia chase installations where the liner was installed by a general contractor, not a chimney company. The repair is a new chase cover with an isolated liner collar and a properly oriented storm collar.
• Mixed-material systems: clay tile liner collapsed behind an Olympia stainless liner. This one isn’t Olympia’s fault, but it’s the most common thing we find when we’re called for a rebuild. Some New York homes had a stainless liner slipped inside a deteriorating clay tile flue without removing the clay first. The clay tiles spall, collapse inward over time, and the stainless liner now bears the weight of broken tile fragments behind it. The camera shows dents and deformation in the liner wall. The fix is a full tear-out and rebuild, and it’s the kind of job where the price goes up once we know what’s actually behind the liner.

Our Olympia Chimney Chimney Liner & Rebuild Process

1. 1
   You call (551) 213-5548. A live person answers. We book a site visit time that works, and we text you the name and photo of the tech who’s coming before they arrive.
2. 2
   We camera-scan the flue. Every visit includes a Level 2 camera inspection, even if you just called us for a cap. We log the condition of the liner, the crown, the smoke chamber, and the flue tile, then we show you the footage.
3. 3
   We give you a written price. Not a verbal estimate, not a range that changes when the tech gets on the roof. Clause 1 of the Haven Standard says the price, scope, and warranty go in writing before any work starts. We’ll tell you exactly what needs to happen, whether that’s liner repair, liner replacement, or a partial rebuild.
4. 4
   We make the parts decision together. If an Olympia liner needs replacement, we’ll tell you whether an OEM Olympia liner is the right call or whether a DuraFlex or HeatShield liner solves the problem better for your flue configuration. You get the recommendation and the price for each option before you choose.
5. 5
   We do the work and document it. The old liner comes out, the new liner goes in, the crown gets formed and cured, the cap gets set. We photograph every stage, and you get the full photo file when we’re done, along with the written warranty.
6. 6
   We test and verify. We run a draft test and a smoke test before we leave, and we show you the results. Then we walk the job with you and hand you the documentation. Same-day cleanup, no debris left at the curb.

Before

After

What Olympia Chimney Chimney Liner & Rebuild Costs in New York

Here’s what we’re quoting in New York for the most common Olympia Chimney liners and rebuilds we see:

• Stainless steel liner replacement (single flue, standard 25-35 ft chimney): $2,400 - $4,200
• Flexible liner replacement with insulation wrap: $2,800 - $4,800
• Liner repair (isolated section, if the rest of the liner is sound): $900 - $2,200
• Partial rebuild (above the roofline, crown, cap, top courses of brick): $3,000 - $9,000
• Full chimney rebuild (down to the roofline or beyond): $9,000 - $22,000

What moves the price: flue height, roof access, whether the clay tile needs tear-out behind the liner, and whether the smoke chamber needs parging at the same time. Rooftop access in a New York townhouse with a narrow party wall can add a day and a scaffold. We don’t charge to come look. Call (551) 213-5548 for an exact quote, and we’ll put it in writing before any work starts.

Why New York Homeowners Call Level Two Chimney New York for Olympia Chimney Work

Every job we’ve done since 2009 has started with a camera down the flue and ended with a written record of what we did. Corrine Halstead started this company on the idea that the photo comes before the repair quote. That’s Clause 4 of the Haven Standard, and it’s the reason we’ve inspected and cleaned more than 38,000 chimneys without ever asking a homeowner to trust us on faith. If you’re looking at an Olympia liner that’s failed or a crown that’s spalling, you’ll get a camera report, a written scope, and a written warranty before you spend a dollar. We also carry DuraFlex, HeatShield, and Gelco liners, so if an Olympia replacement isn’t the best play, we’ll tell you and price the alternative. The camera doesn’t argue with you, and neither does the price sheet.

FAQs